EN2 – EZ Communicator Navigator 2 Wire Push Button Station

EN4 – EZ Communicator Navigator 4 Wire Push Button StationThe eZ Communicator  navigator 2 Wire Push Button Station (en2  PBS) is the pedestrian interface to the eZ Communicator navigator accessible Pedestrian System. a system includes a Central Control Unit (CCU2en), an E-Configurator, and up to 16 Push Button Station (4 maximum per channel). the en2 PBS provides valuable information and cues via both a vibrating arrow button and audible sounds making the intersection accessible for all pedestrians. all sounds emanate from the back of the unit. a sunlight-visible red LED latches “ON” to confirm the button has been pushed. The EN2 PBS includes the body (shown), sign, ADA compliant push button and mounting hardware.


By interfacing with the CCU2EN that installs in the traffic control cabinet, the EN2 PBS can provide the following standard features:

  • Confirmation of button push via latching LED, sound, and tactile
  • Direction of travel (with extended button push)
  • Standard locating tone during Don’t Walk (and Clearance if desired)
  • Cuckoo, Chirp, rapid tick, Verbal, or user customized voice messages during walk. a total of 10 walk sound options are included with an additional 2 locations for custom voice messages / walk sounds
  • Vibrating button during walk
  • Choice of 4 locating tones, custom sound, or verbal countdown during PeD clearance
  • All sounds automatically adjust to ambient over 60dB range
  • Most sounds have a minimum and maximum volume independently
  • Sounds are synchronized across all PBSs
  • Extended button push can turn on, boost volumes, and/or mute all sounds except those on the activated crosswalk
  • Can provide  pre-configured  special  messages  played  throughout the entire intersection upon a central system activated signal (preemption)
  • Custom audio messages easily changed via USB port
  • Firmware updates provided through USB port
  • Independent ambient adjustment setting for the locate tone which allows the locate tone volume to be set to play below the ambient noise level
  • Two separate program configurations with all options available which can be switched via external input

Download the full data sheet of EN2 - EZ Communicator Navigator 2 Wire Push Button Station